dynamic balance is placed on the rim opposite the heavy point while the other half is placed 180 away and on the opposite side of the rim WHEEL RUN OUT AND ECCENTRICITY The wheels should
| Book | Page | Context |
|---|---|---|
|
|
uppermost or lightest point 8 Install two balancing weights on the rim opposite each other and 180 away from the heavy point 9 Move these weights equally in opposite direction toward the heavy side until ... dynamic balance is placed on the rim opposite the heavy point while the other half is placed 180 away and on the opposite side of the rim WHEEL RUN OUT AND ECCENTRICITY The wheels should |
|
|
rear mounted engine dropped center underbody side and rear doors that open either 95 or a full 180 for easy access to loading areas FRONT END STRUCTURE Common to all models the front end structure |
|
|
screws at lower end of ventilator sash channel C fig 10 47a 5 Rotate ventilator assembly approximately 180 so I mounting bracket will clear door opening fig 10 48a Installation 1 Lower ventilator assembly into |
|
|
first and reverse sliding gear Possible correction is to change index of gear on clutch sleeve approximately 180 and or turning the rear side of first and reverse gear to the front of the transmission |
|
|
split halves of the crankcase The crankshaft has six throws arranged in pairs each crankpin being removed 180 from the other member r r r o Section Across Crankshaft of its pair Pairs are located |