continuing 5 Models equipped with Indicator Lamp If lamp glows start the engine and run it at 1500 rpm or above Check indicator lamp If lamp fails to go out per ADJUSTING REGULATOR VOLTAGE form ... terminal NOTE At this point 3 field Circuit has been S 8 Run engine at 1500 rpm or above for at least 15 min tabirshed and any other problem win be in the utee ... regulator is okay motor to high speed run engine at or above 1500 rpm If voltage is not within 12 5 to 15 2 volts leave for a few minutes if necessary and read
adjustable carbon pile across the battery Q 8 Start the engine and slowly bring the speed to 1500 I T RPM and at the same time adjust the carbon pile load to hold the voltage
indicate check valve failure Inspedion Orally blow through the check valve toward tube Accelerate engine to approximately 1500 rpm and Ob serve air flow from tubes If air flow increases as en gine is accelerated