| Book | Page | Context |
|---|---|---|
 |
 |
continuing 5 Models equipped with Indicator Lamp If lamp glows start the engine and run it at 1500 rpm or above Check indicator lamp lf lamp fails to go out per form appropriate test ... Tests before continuing NOTE At this point a field Circuit has been S 8 Run engine at 1500 rpm or above for at least 15 min utes of warm up then cycle regulator voltage control ... regulator is okay motor to high speed run engine at or above 1500 rpm If voltage is not within 12 5 to 15 2 volts leave for a few minutes if necessary and read |
|
 |
posts 1 L 8 Start the engine and slowly bring the speed to 1500 RPM and at the same time adjust the carbon pile load to hold the voltage at 14 volts 9 Read |
|
 |
INJECTOR REACTOR SYSTEM 6T 5 AIR INJECTION PUMP Inspection E Accelerate engine to approximately 1500 RPM and ob serve air flow from tubes If air flow increases as en gine is accelerated pump is operating |