Flange to Toe Panel Screws 120 lb in TORQUE CHART Column Upper and Lower Cover Screws 13 lb in Worn Bearing Preload 3 1 2 to 4 1 2 in lbs Turn Signal Switch Mounting
| Book | Page | Context |
|---|---|---|
|
|
SPECIFICATIONS 9 SECTION 9 STEERING GEAR Mast Jacket Flange to Toe Plate Screws 120 Ib in Steering Ratio Instrument Panel Column Mounting Gear 18 1 Bracket Bolts 20 lb ft Overall 23 5 1 Column ... Flange to Toe Panel Screws 120 lb in TORQUE CHART Column Upper and Lower Cover Screws 13 lb in Worn Bearing Preload 3 1 2 to 4 1 2 in lbs Turn Signal Switch Mounting |
|
|
Bolt Lock Nut Torque 80 lb ft Camber Positive 1 1 2 Stabilizer Bar Clamp Bolt Torque 120 lb in Steering Axis Inclination 6 1 2 t 1 2 Replacement Ball Joint to Control |
|
|
screws C Tighten It is also necessary to realign the column whenever the three bolts C to 120 in lbs torque fig 5 assembly has been completely freed or removed from All Corvair models |
|
|
bolt should be tightened to the revised torque reading of 80 lb ft instead of 90 120 lb ft as stated in the 1965 Corvair Chassis Shop Manual 1 E Torque Specifications Refer to specifications |