r v CONVERTER ACCESS HOLE COVER BELL HOUSING i r y A 1 I r v FORWARD FLEX PLATE Fig 6 10 Converter to Flex Plate Attachment access hole at the 12 o clock position in the converter housing The converter may be rotated by prying against the starter gear teeth on the converter housing with a screwdriver 4 Support the Transaxle with a chain fall or other suitable lift and an improvised sling 5 Complete removal of Transaxle by removing the attaching bolts and lockwashers securing the differential carrier to the converter housing then pull the Transaxle unit away from the engine Remove converter immediately once accessible to prevent its being dropped and damaged and remove turbine shaft fig 6 11 1 Fig 6 11 Removing Turbine Shaft Separation of Automatic Powerglide Transmission and Differential Carrier 1 Place the Transaxle on a flat surface 2 Pull the turbine shaft carefully through the transmission and carrier being careful not to damage the turbine shaft bushings on the pump shaft splines 3 Remove the screw securing the governor assembly to the Transaxle and remove governor fig 6 12 4 Remove the three remaining bolts securing the i v v y e e i s k v