SIDE CARGO RAMP DOOR ASSEMBLY Removal and Installation 1 Unlock ramp door to wide open position and support so outer panel is not damaged on removal 2 Remove retaining screws from hinge assembly to door and remove door assembly 3 To install reverse the above removal procedure Adjust as outlined below Adjustment 1 Adjust striker in or out to engage with handle and lock latch to maintain a flush to 1 t with ramp door outer panel to pickup side panel 2 Adjust safety catch striker so that safety catch fits snugly onto striker catch 3 Loosen pin guide retaining lock nuts 13 fig 10 106a and turn guide pin so that it enters guide firmly to prevent door chucking 7 fig 10 107a Tighten lock nuts after adjustment SIDE CARGO RAMP DOOR HANDLE AND LOCK Removal and Installation 1 Release safety catch and open ramp door Fig 10 1 08a Body Weatl 2 Remove four retaining screws from handle and lock assembly fig 10 106a 3 To install reverse the removal procedure and adjust striker as outlined under adjustment 7 a r A I DWY SIDE w ASSEMBLY 1 8 WELD NUT J i i VIEW A Fig 10 107a Side Cargo Ramp Door Attachment 1 Spacer 5 Screw and Lock Assembly 2 Striker 6 Screw and Lock Assembly 3 Screw 7 Guide 4 Safety Catch B Safety Catch Lever Release ierstripping Tool Set IJ 21891