INDEX Page Lock Remote Control Assembly 10 32 Lock and Remote Control Connecting Link 10 32 Outside Handle 10 33 Outside Handle Push Button 10 33 Rear Doors 10 33 Rear Door Assembly and Hinges 10 33 Window Assembly 10 34 Window Glass Run Channel 10 35 Window Glass Run Channel Lower Rear Retainer Assembly 10 35 Window Regulator 10 36 Inner Panel Cam Remote Control and Connecting Rod Assembly 10 36 Lock Assembly 10 36 Inside Locking to Lock Rod Assembly 10 37 Outside Handle 10 37 Outside Handle Push Button 10 38 Headlining 10 38 Seats and Seat Compartment Trim 10 39 Front Seat 10 39 Front Seat Assembly 10 39 Seat Adjusters 10 39 Seat Back 10 40 Seat Side Protector Cover 10 40 Repositioning Front Seat Assembly 10 40 Rearward Adjustment of Seat 10 40 Seat Height Adjustment 10 41 Seat Tilt 10 41 Station Sedan Folding Rear Seat 10 41 Seat Back Catch Plate 10 41 Seat Back Finishing Mouldings 10 42 Rear Floor Filler Panel and Hinge 10 42 Seat Back Panel Locking Pin 10 42 Seat Back Mounting Support Link 10 42 GENERAL II BODY NAME PLATE A body name plate containing style trim body and paint identification numbers is attached to the interior left side of the engine compartment for the convenience of the serviceman see Section 1 BODY LUBRICATION The movable mechanical parts of the body are lubricated at the factory to insure proper and quiet operation Because of the frequent use of some parts ontinued Page Seat Back Assembly 10 42 Rear Seat Compartment Trim 10 42 Side Trim Replacement 10 42 Rear Trim and Insulation Replacement 10 43 Front Trim and Insulation Replacement with Folding Seats i0 43 Division Panel Trim and Insulation Replacement 10 43 Wheelhouse Trim Replacement 10 43 Rear End 10 43 Back Window Assembly 10 43 Engine Compartment 10 45 Lid 10 45 Lid Hinge 10 46 Lid Support 10 46 Lid Latch 10 46 Lower Gutter Sealing Strip 10 47 Exterior Mouldings 700 Models 10 47 Removal and Installation 10 47 Windshield Pillar Drip Moulding 10 47 Engine Compartment Lid Outer Panel Moulding 10 47 Front Compartment Lid Outer Panel Moulding 10 47 Front Fender Lower Moulding 10 47 Roof Drip Moulding Front Scalp 10 47 Roof Drip Moulding Rear Scalp 10 47 Front Door Lower Outer Panel Moulding 10 49 Rear Door Lower Outer Panel Moulding 10 49 Rear Fender Lower Moulding 10 50 Bumpers 10 50 Front Bumper 10 50 Rear Bumper 10 50 Special Tools 10 70 4FORMATION such as door locks and door lock strikers it is important that these readily accessible parts be lubricated at least twice a year Other body parts should be lubricated whenever access to the parts is available Refer to Section 2 Lubrication and General Maintenance for complete body lubrication information BODY WIRING Refer to Section 8 Electrical Systems for complete body wiring information CORVAIR SHOP MANUAL